|
- remove the screws at the trigger guard, start with the one at the back of the guard.
- next remove the front screw (when reinstalling, tighten the back
trigger guard screw at last and don't overtighten).
- remove the action from the stock.
- don't loose the small screw at the back of the trigger block, it's kept in place only by
some grease.
- remove the pins which hold the trigger block in the trigger house with a suitable drift.
- when the trigger block comes loose, the safety jumps out as well. Make sure you don't
loose the small safety pin spring.
- after removal of the 2 pins, the trigger block can be taken out of the trigger house.
- unscrew the fixing nut that secures the trigger house.
Go to page 2
|
